EV Chargers
LEVEL 2 EV CHARGERS: PUBLIC & RESIDENTIAL USE
Level 2 chargers are the most common type of EV chargers on the market and are widely available in public spaces, shopping centers, government buildings, workplaces and even some residential homes. They charge vehicles at a rate of 12-80 miles an hour, filling most EV batteries within 4.5 hours.
Residential Use
32 Amp Level 2 Electric Vehicle Charging Station
This EV charger is used for standard single vehicle residential charging and can be mounted inside a garage or outside of a home.
-
- Compatible with any SAE J1772™ electric vehicle
- Charging unit made with thermoplastic, water-resistant enclosure rated NEMA Type 3R
- Reinforced cable design prevents freezing and cracking during extreme temperatures
- Easy installation with pre-attached input cable
- Mounting hardware included
- Energy Star certified
Specifications
Electrical Specifications
Amperage: 32 A
Breaker: 40 A
Charge Connector Cord: #10 AWG SAE J1772
Number of Phase / Wire: L1, L2 and Ground, Bottom Feed
Operating Temperature: -30°C to 50°C
Output Power: 7.6kW
Short Circuit Current Rating: 20 mA CCID per UL 2231
Voltage: 208/240 VAC
Environmental Specifications
Altitude: Up to 6,500 ft. (2,000 m)
Charging Cable Operating Temperature: -30°C to +50°C
Cooling: Natural Cooling
Operating Humidity: < 95% Relative Humidity, Non-Condensing
Material Specifications
Enclosure Material: Plastic (PC+PBT)
Enclosure Rating: NEMA Type 3R
Status Indicator: Power Present, Charging, Fault
Mechanical Specifications
Cable Length: 18 ft. (5.5 m)
Product Features
Application: Home, Commercial
Cover Locking Mechanism: Phillips Head Screws, No Padlock Option
Device Type: Charger
Standards and Certifications
Standards and Certifications: UL2594, UL 2231-1, UL 2231-2, UL 2251, UL 62, UL 991, UL 1998, NFPA 70 Article 625, UL840
Warranty
Warranty: 2-Year Limited
48 Amp Level 2 Electric Vehicle Charging Station
This residential EV charger is made for owners who require faster at-home charging speeds for higher capacity EV batteries. This unit can be mounted inside a garage or outside of a home.
-
- Compatible with any SAE J1772™ electric vehicle
- Charging unit made with thermoplastic, water-resistant enclosure rated NEMA Type 3R
- Reinforced cable design prevents freezing and cracking during extreme temperatures
- Easy installation with pre-attached input cable
- Mounting hardware included
- Energy Star certified
Specifications
Electrical Specifications
Amperage: 48 A
Breaker: 60 A
Charge Connector Cord: #7 AWG SAE J1772
Number of Phase / Wire: L1, L2 and Ground, Bottom Feed
Operating Temperature: -30°C to 50°C
Output Power: 11.6kW
Short Circuit Current Rating: 20 mA CCID per UL 2231
Voltage: 208/240 VAC
Environmental Specifications
Altitude: Up to 6,500 ft. (2,000 m)
Charging Cable Operating Temperature: -30°C to +50°C
Cooling: Natural Cooling
Operating Humidity: < 95% Relative Humidity, Non-Condensing
Material Specifications
Enclosure Material: Plastic (PC+PBT)
Enclosure Rating: NEMA Type 3R
Status Indicator: Power Present, Charging, Fault
Mechanical Specifications
Cable Length: 18 ft. (5.5 m)
Product Features
Application: Home, Commercial
Cover Locking Mechanism: Phillips Head Screws, No Padlock Option
Device Type: Charger
Standards and Certifications
Standards and Certifications: UL2594, UL 2231-1, UL 2231-2, UL 2251, UL 62, UL 991, UL 1998, NFPA 70 Article 625, UL840
Warranty
Warranty: 2-Year Limited
Public Use
Single Head Wall Mount Level 2 Networked Public Charging Station
This wall mounted charging station is perfect for municipal and commercial parking structures or can be mounted directly to the exterior wall of an industrial facility.
-
- For use with any SAE J1772™ compatible electric vehicle
- Features ChargePoint Network Services
- 18-foot self-retracting cord
- LCD display provides easy-to-use charging instructions
Specifications
Electrical Specifications
Amperage: 30 A
Breaker: 40 A dual pole (non-GFCI type)
Circuit: 40 A Dedicated Circuit
Output: 7.2 kW (240 VAC @ 30 A)
Voltage: 208/240 VAC
Wiring: 3-wire (L1, L2, Earth)
Mechanical Specifications
Application: Commercial, Public Use
Cable Length: 18 ft. (5.5 meters)
Card Reader: ISO 15693, 14443, NFC
Charge Connector Cord: SAE J1772™
Device Type: Charger
Feature: Overhead Cable Management System, Ground Fault Detection, Open Safety Ground Detection, Plug-Out Detection, 5.7” full color UV protected LCD Display
Material Specifications
Enclosure Rating: NEMA Type 3R per UL 50E
Environmental Specifications
EMC Compatibility: Compliance with FCC Part 15 Class A
Operating Humidity: Up to 85% @ +50°C (122°F) non-condensing
Operating Temperature: -40 °F to 122 °F
Surge Protection: 6 kV @ 3000 A
Terminal Block: 221°F (105°C)
Standards and Certifications
Applicable Standards: UL listed for USA and cUL certified for Canada; complies with UL 2594, UL 2231-1, UL 2231-2, and NEC Article 625
Warranty
Warranty: 1-Year Limited
Dual Head Wall Mount Level 2 Networked Public Charging Station
This unit provides the same versatility as the Single Head Wall Mount, but with two charging cables for greater driver access.
Specifications
Electrical Specifications
Amperage: 30 A
Breaker: 40 A dual pole (non-GFCI type)
Circuit: 40 A Dedicated Circuit
Output: 7.2 kW (240 VAC @ 30 A) or 3.8 kW (240 VAC @ 16 A) x2
Voltage: 208/240 VAC
Wiring: 5-wire (L1, L1, L2, L2, Earth)
Mechanical Specifications
Application: Commercial, Public Use
Cable Length: 18 ft. (5.5 meters)
Card Reader: ISO 15693, 14443, NFC
Charge Connector Cord: SAE J1772™
Device Type: Charger
Feature: Overhead Cable Management System, Ground Fault Detection, Open Safety Ground Detection, Plug-Out Detection, 5.7” full color UV protected LCD Display
Material Specifications
Enclosure Rating: NEMA Type 3R per UL 50E
Environmental Specifications
EMC Compatibility: Compliance with FCC Part 15 Class A
Operating Humidity: Up to 85% @ +50°C (122°F) non-condensing
Operating Temperature: -40 °F to 122 °F
Surge Protection: 6 kV @ 3000 A
Terminal Block: 221°F (105°C)
Standards and Certifications
Applicable Standards: UL listed for USA and cUL certified for Canada; complies with UL 2594, UL 2231-1, UL 2231-2, and NEC Article 625
Warranty
Warranty: 1-Year Limited
Single Head Bollard (Free-Standing) Level 2 Networked Public Charging Station
The charging unit is attached to a standalone pedestal, allowing the unit to be placed in a variety of different parking scenarios.
-
- For use with any SAE J1772™ compatible electric vehicle
- Features ChargePoint Network Services
- 18-foot self-retracting cord
- LCD display provides easy-to-use charging instructions
Specifications
Electrical Specifications
Amperage: 30 A
Breaker: 40 A dual pole (non-GFCI type)
Circuit: 40 A Dedicated Circuit
Output: 7.2 kW (240 VAC @ 30 A)
Voltage: 208/240 VAC
Wiring: 3-wire (L1, L2, Earth)
Mechanical Specifications
Application: Commercial, Public Use
Cable Length: 18 ft. (5.5 meters)
Card Reader: ISO 15693, 14443, NFC
Charge Connector Cord: SAE J1772™
Device Type: Charger
Feature: Overhead Cable Management System, Ground Fault Detection, Open Safety Ground Detection, Plug-Out Detection, 5.7” full color UV protected LCD Display
Material Specifications
Enclosure Rating: NEMA Type 3R per UL 50E
Environmental Specifications
EMC Compatibility: Compliance with FCC Part 15 Class A
Operating Humidity: Up to 85% @ +50°C (122°F) non-condensing
Operating Temperature: -40 °F to 122 °F
Surge Protection: 6 kV @ 3000 A
Terminal Block: 221°F (105°C)
Standards and Certifications
Applicable Standards: UL listed for USA and cUL certified for Canada; complies with UL 2594, UL 2231-1, UL 2231-2, and NEC Article 625
Warranty
Warranty: 1-Year Limited
Dual Head Bollard (Free-Standing) Level 2 Networked Public Charging Station
The Dual Head Bollard model includes the same features as the Single Head unit, but with two charging cords, allowing you to serve more EV drivers at a time.
Specifications
Electrical Specifications
Amperage: 30 A
Breaker: 40 A dual pole (non-GFCI type)
Circuit: 40 A Dedicated Circuit
Output: 7.2 kW (240 VAC @ 30 A) or 3.8 kW (240 VAC @ 16 A) x2
Voltage: 208/240 VAC
Wiring: 5-wire (L1, L1, L2, L2, Earth)
Mechanical Specifications
Application: Commercial, Public Use
Cable Length: 18 ft. (5.5 meters)
Card Reader: ISO 15693, 14443, NFC
Charge Connector Cord: SAE J1772™
Device Type: Charger
Feature: Overhead Cable Management System, Ground Fault Detection, Open Safety Ground Detection, Plug-Out Detection, 5.7” full color UV protected LCD Display
Material Specifications
Enclosure Rating: NEMA Type 3R per UL 50E
Environmental Specifications
EMC Compatibility: Compliance with FCC Part 15 Class A
Operating Humidity: Up to 85% @ +50°C (122°F) non-condensing
Operating Temperature: -40 °F to 122 °F
Surge Protection: 6 kV @ 3000 A
Terminal Block: 221°F (105°C)
Standards and Certifications
Applicable Standards: UL listed for USA and cUL certified for Canada; complies with UL 2594, UL 2231-1, UL 2231-2, and NEC Article 625
Warranty
Warranty: 1-Year Limited
LEVEL 3 EV CHARGERS: PUBLIC USE
Level 3 EV chargers are sometimes called Fast Chargers. They can charge EV vehicles at a rate of 3 to 20 miles per minute, filling a typical EV battery to 80% in 30-60 minutes. These units require high voltages and are designed for large-scale, high-traffic public spaces such as shopping centers or travel stops along interstate highways.
Public Use
Evr-Green DC – Networked Public Charging Station
This Level 3 charging unit is perfect for large-scale commercial and public use.
-
- Features two connector types (CCS1 and CHAdeMO) for fast DC charging of the latest electric vehicles
- Can also charge Tesla vehicles using Tesla-supplied adapter
- Features ChargePoint Network Services
- Compliant with FTA and FHWA Buy America Options, and OCPP 1.6.
- Includes Concrete Mounting Kit
Specifications
Connectivity Specifications
Local Area Network: 2.4 GHz and 5 GHz WiFi (802.11 b/g/n)
Plug-Out Detection: Power terminated per JEVS G104 (CHAdeMO), SAE J2931 (CCS1)
Service and Maintenance: Remove system monitoring, diagnostic, and proactive maintenance
Supported Communication Protocols: OCPP
Vehicle Safety Communication: CHAdeMO – JEVS G104 over CAN, CCS1 – SAE J1772 over PLC
Wide Area Network: 4G LTE (fall back to 3G GSM)
Electrical Specifications
Dynamic Power Management: Allows a fixed maximum power output per station or lets the system dynamically manage the power distribution per station
Harmonics: iTHD <5% (Complies with IEEE 519 Requirements)
Input Rating: 480Y/277V AC, 3-Phase, 80A, 60Hz
Max Modules Per Station: 2
Max Output Current: Station: 156A , Power Module: 78A
Max Output Power: Station: 62.5 kW , Power Module: 31.25 kW
Output Voltage: 200 – 1,000V DC
Paired Max Output Current: CCS1: 174A or 200A , CHAdeMO: 140A
Paired Max Output Power: 125 kW
Power Conversion Efficiency: > 95%
Power Factor: 0.99 at full load
Remote Energy Management: Manage output power via the ChargePoint Admin Portal, API, and Open ADR 2.0b VEN
Wiring: L1, L2, L3, Neutral & Earth
Environmental Specifications
EMC Compliance: U.S.: FCC part 15 Class A; EU: EN55011, EN55022 and IEC61000-4
Impact Rating: IK10
Operating Humidity: Up to 95% @ 50°C (122°F) non-condensing
Operating Temperature: -40 °F to 122 °F
Operational Altitude: <3,000 m (<9,800 ft)
Storage Temperature: -40 °F to 122 °F
Surge Protection: Tested to IEC 6100-4-5, Level 5 (6 kV @ 3,000A). In geographic areas subject to frequent thunderstorms, supplemental surge protection at the service panel is recommended
Mechanical Specifications
Application: Public Use, Commercial
Authentication: RFID: ISO 15693, ISO 14443, NEMA EVSE 1.2-2015 (UR) Tap to Charge
Cable Length With Swing Arm: Full Horizonal Reach: 4.27m (14′)
Device Type: Charger
Supported Connector Types: CHAdeMO, CCS1 (SAE J1772™ Combo)
Standards and Certifications
Safety and Compliance: UL and cUL listed: complies with UL 2202, UL 2231-1, UL 2231-2, CSA 107.1 , CE marking: complies with IEC 62196, IEC 61851
Evr-Green DC – Networked Public Charging Station
This Level 3 charging unit is perfect for large-scale commercial and public use.
-
- Features two connector types (CCS1 and CHAdeMO) for fast DC charging of the latest electric vehicles
- Can also charge Tesla vehicles using Tesla-supplied adapter
- Features ChargePoint Network Services
- Compliant with FTA and FHWA Buy America Options, and OCPP 1.6.
- Includes Concrete Mounting Kit
Specifications
Connectivity Specifications
Local Area Network: 2.4 GHz and 5 GHz WiFi (802.11 b/g/n)
Plug-Out Detection: Power terminated per JEVS G104 (CHAdeMO), SAE J2931 (CCS1)
Service and Maintenance: Remove system monitoring, diagnostic, and proactive maintenance
Supported Communication Protocols: OCPP
Vehicle Safety Communication: CHAdeMO – JEVS G104 over CAN, CCS1 – SAE J1772 over PLC
Wide Area Network: 4G LTE (fall back to 3G GSM)
Electrical Specifications
Dynamic Power Management: Allows a fixed maximum power output per station or lets the system dynamically manage the power distribution per station
Harmonics: iTHD <5% (Complies with IEEE 519 Requirements)
Input Rating: 480Y/277V AC, 3-Phase, 80A, 60Hz
Max Modules Per Station: 2
Max Output Current: Station: 156A , Power Module: 78A
Max Output Power: Station: 62.5 kW , Power Module: 31.25 kW
Output Voltage: 200 – 1,000V DC
Paired Max Output Current: CCS1: 174A or 200A , CHAdeMO: 140A
Paired Max Output Power: 125 kW
Power Conversion Efficiency: > 95%
Power Factor: 0.99 at full load
Remote Energy Management: Manage output power via the ChargePoint Admin Portal, API, and Open ADR 2.0b VEN
Wiring: L1, L2, L3, Neutral & Earth
Environmental Specifications
EMC Compliance: U.S.: FCC part 15 Class A; EU: EN55011, EN55022 and IEC61000-4
Impact Rating: IK10
Operating Humidity: Up to 95% @ 50°C (122°F) non-condensing
Operating Temperature: -40 °F to 122 °F
Operational Altitude: <3,000 m (<9,800 ft)
Storage Temperature: -40 °F to 122 °F
Surge Protection: Tested to IEC 6100-4-5, Level 5 (6 kV @ 3,000A). In geographic areas subject to frequent thunderstorms, supplemental surge protection at the service panel is recommended
Mechanical Specifications
Application: Public Use, Commercial
Authentication: RFID: ISO 15693, ISO 14443, NEMA EVSE 1.2-2015 (UR) Tap to Charge
Cable Length With Swing Arm: Full Horizonal Reach: 4.27m (14′)
Device Type: Charger
Supported Connector Types: CHAdeMO, CCS1 (SAE J1772™ Combo)
Standards and Certifications
Safety and Compliance: UL and cUL listed: complies with UL 2202, UL 2231-1, UL 2231-2, CSA 107.1 , CE marking: complies with IEC 62196, IEC 61851
All of these EV chargers and more can be purchased on New York State contract.
Ready for a price quote?
